Skip to main content

Cobra 4x4 Brush Scrub Bar Side Rails for Angled Rock Slider fits Holden Colorado 2012 Onwards Bull bar Powder Coated Steel

SKU: WN-COLO12-ANGL-RS-BRUSH
Was $319.00
NOW $249.00
-44%
RRP $448.00
  • 4 payments of $62.25
  • paypal
Colour: Black
Type: Brush bar
Material: Steel
Hurry up, Only 8 left! Ship in 2 business days
  • Australia Owned
  • Warranty
  • 30 Days Return

Cobra 4x4 Brush Bars – Exclusively for Cobra 4x4 Holden Colorado 2012 Onwards Angled Rock Sliders

Save potentially $1,000 compared with having brush bars custom-made.

Avoid expensive custom fabrication with the Cobra 4x4 Brush Bars—a ready-made solution designed **exclusively for Cobra 4x4 Holden Colorado 2012 Onwards angled rock sliders with removable front sections. These bars provide extra protection around your front quarter panels while adding a tough, aggressive look to your build.

Manufactured from heavy-duty 48mm galvanised steel tubing, they feature a thick powder coating for a durable, long-lasting satin black finish.

Extra Length for Flexible Fitment

The bars are purposely made longer to accommodate different bull bar hoop positions. Your professional fitter can trim and, where suitable, bend them to achieve the required fit. Modified areas must have their protective coating restored.

They may also be adapted to hoopless bull bars, provided your fitter confirms a suitable connection point. **Connectors for hoopless bull bars must be sourced separately.

Included Clamps & Alternative Connections

  • 48mm clamps included: Suitable for bull bar hoops with 48mm outside-diameter tubing
  • Slimmer hoops:Your fitter can assess suitable reducers or packing to achieve a secure clamp fit.
  • Thicker hoops: Larger clamps must be purchased separately. 63mm clamps are commonly available online for approximately $30, depending on the supplier.
  • Alternative clamps and connectors are not included.

Compatibility & Installation

Fits Holden Colorado 2012 Onwards Dual Cab equipped ONLY with Cobra 4x4 Colorado angled rock sliders with removable front sections. Not suitable for other brands or slider designs.

Professional installation is required. Trimming, angle adjustment and additional connectors may be needed to suit your bull bar. Instructions are not included.

Click here to add the Angled Rock sliders

  • Fits: Holden Colorado 2012 Onwards Equipped with Cobra 4x4 Angled rock sliders with removable front section.
  • Condition: New
  • Color: Black
  • Material: Steel (satin black powder-coated)
  • Assembly Required: Yes
  • Pipe diameter (outer): 48mm roughly
  • Pipe diameter (inner): 43mm roughly
  • Manufactured using heavy-duty steel
  • Clamp diameter: 48mm (Fits bullbar with 48mm diameter tube only)
  • 2 x Brush bars
  • Fittings
  • 2 x 48mm Clamps
SKU WN-COLO12-ANGL-RS-BRUSH
Barcode # WN-COLO12-ANGL-RS-BRUSH
Brand COBRA 4X4
Shipping Weight 10.0000kg
Shipping Width 1.820m
Shipping Height 0.180m
Shipping Length 0.500m
Shipping Cubic 0.163800000m3
Unit Of Measure ea

Frequently Asked Questions (FAQs) – Cobra 4x4 Brush Bars for Holden Colorado 2012 Onwards

1. Which rock sliders are these Cobra 4x4 brush bars compatible with?

These brush bars are designed to fit Cobra 4x4 angled rock sliders with removable front sections, suitable for Holden Colorado Dual Cab models from 2012 onwards. They are not compatible with other brands, straight rock sliders or other slider designs.

2. How much could I save compared with custom-made brush bars?

You could save approximately $1,000 compared with having brush bars fabricated from scratch. These ready-made bars reduce the fabrication work required, although your actual savings depend on local fabrication quotes and the installation or modifications needed.

3. Why are the brush bars supplied extra long?

The extra length allows your fitter to adapt the bars to different bull bar hoop positions and shapes on your Holden Colorado. They can be trimmed to suit your vehicle’s setup instead of requiring a completely custom-made set.

4. Can my fitter bend the brush bars to suit my bull bar?

Your professional fitter can assess whether the bars can be safely bent or adjusted to achieve the required angle. Any modifications must maintain the bars’ strength, and affected galvanising or powder coating must be restored to protect against corrosion.

5. What size bull bar clamps are included?

The brush bars come with 48mm clamps, designed to connect to bull bar hoops with an outside tube diameter of 48mm. Measure your bull bar tubing before installation to confirm whether the supplied clamps will suit.

6. What if my bull bar hoops are smaller or larger than 48mm?

For smaller hoops, your fitter will need to assess suitable clamp reducers or secure packing. For larger hoops, you must source correctly sized clamps separately. As a guide, 63mm clamps may be available online for approximately $30, depending on the supplier and quantity required.

7. Can these brush bars connect to a hoopless bull bar?

They may be adapted to some hoopless bull bars fitted to Holden Colorado models from 2012 onwards, provided your professional fitter confirms a suitable mounting point and secure connection method. Hoopless bull bar connectors are not included and must be sourced separately. Compatibility is not guaranteed with every bull bar.

8. What are the Cobra 4x4 brush bars made from?

They are manufactured from heavy-duty 48mm galvanised steel tubing with a thick powder coating and satin black finish. This combination provides a durable protective finish designed for long-lasting use.

9. What protection do brush bars provide?

Brush bars add a protective barrier around the front quarter panels of your Holden Colorado, helping reduce contact with scrub, branches and vegetation when driving off-road. They also complement the appearance of your compatible Cobra 4x4 angled rock sliders and bull bar for a more complete, aggressive 4x4 look. They do not guarantee protection against all impacts or vehicle damage.

10. Do these brush bars require professional installation?

Yes. Although they connect to compatible Cobra 4x4 angled rock sliders, fitting to your Holden Colorado's bull bar may require trimming, angle adjustments or alternative connectors. Professional installation is required, and instructions are not included. The brush bars are supplied with 48mm clamps; the rock sliders and bull bar are sold separately.

This ad is subject to the company policy as well as the following terms & conditions:

  • This item requires professional installation.
  • 30-day returns are valid as long as the item is in brand new condition with its original packaging. 
  • Returned items will incur a 10% restocking fee.

This ad is subject to the company policy as well as the following terms & conditions:

  • This item requires professional installation.
  • 30-day returns are valid as long as the item is in brand new condition with its original packaging. 
  • Returned items will incur a 10% restocking fee.

Our Reviews

More Reviews

More From This Category

We Also Recommend


AUSTRALIA-WIDE DELIVERY

Metro & regional Australia

SECURE CHECKOUT

Safe and secure payments
 

SHOP NOW, PAY LATER

Pay later options available

PRODUCT WARRANTY

Backed for added peace of mind